Micro Moulded Parts 202A111-25-G07-0
Micro Moulded Parts 202A111-25-G07-0
File Size:
127.24 kB
Date:
07 September 2020
Micro heat shrink boots, straight and lipped
Features
Micro Moulded Parts, 202A111-25-G07-0 (straight, lipped)
These micro moulded parts or heat shrink boots from TE Connectivity (Raychem / Tyco) are used for mechanical protection and cable strain relief. Produced in a variety of shapes and materials, the range of Raychem branded moulded shapes are supplied in an expanded form. On the application of heat, they shrink to a pre-determined size and shape, providing a tough, protective covering for the components over which they are installed. These moulded parts are with or without coating available.
| As supplied | After heating |
 |
 |
Changelog
| Dimensions in mm | |||||||||||
| Part Number | Inside diameter (coating reduces max. 1.5mm) | P | R | S | T | J0 | HW | JW | |||
| As supplied | After heating | Tolerance +/- 10% | Tolerance +/- 20% | ||||||||
| H | J | H | J | ||||||||
| 202A111-25-G07-0 | 17 | 17 | 7.9 | 2.2 | 25 | 14 | 3 | 1 | 6 | 1.7 | 1 |
Notes
| Material (not all combinations available) | ||
| Ordering Code | Material | Operating temperature range |
| -3 | Polyolefin, semi-rigid | -55°C to +135°C |
| -4 | Polyolefin, flexible | -55°C to +135°C |
| -12 | Fluoroelastomer, flexible | -55°C to +200°C |
| -25 | Elastomer, fluid resistant | -75°C to +150°C |
| -100 | Polyolefin, halogen free | -30°C to +105°C |
| Coating, Adhesive | ||
| Ordering code | Material | Operating temperature range |
| /42 | Polyamide, hot-melt | -20°C to +60°C |
| /86 | High performance, hot-melt | -55°C to +120°C |
| /225 | Epoxy/Polyamide | -75°C to +150°C |
| Colour | ||
| Ordering Code | Colour | |
| 0 | Black | |
Produkt anfragen / bestellen
Raytronics AG
Bösch 37
6331 Hünenberg
Bösch 37
6331 Hünenberg
Tel
+41 41 768 65 75
Fax
+41 41 768 65 80
Mail
Raytronics AG
Bösch 37
6331 Hünenberg
6331 Hünenberg
Tel
+41 41 768 65 75
Fax
+41 41 768 65 80
Mail
Linkedin: Raytronics AG