Hoch

Product categories

Heat-shrink-tubes without adhesive

Button Specifications enSchrumpfschlaeuche ohne kleber

Heat shrink tubing were developed when Raychem's scientists pioneered the application of radiation crosslinking and the development of heat-shrinkable polymer products. Today the heat shrinking tubes of TE Connectivity (Tyco / Raychem) are recognized worldwide for its high quality and wide range of applications. Raytronics AG offers you tubes made of polyolefins, fluoropolymers and elastomers enhanced by radiation crosslinking and heat-shrinkability. When heated during installation, our tubings shrinks to conform to virtually any shape. They provide dependable insulation, mechanical protection, and strain relief, as well as aesthetic appeal.

You can choose from tubings that are highly flexible or semi rigid, designed for operation in high- or low- temperature environments, and halogen-free and flame-retardant to meet a range of industry standards. Available in many sizes, constructions, lengths, and colours to meet both commercial and military specifications, our tubings can also be customized for special applications.

Installation is fast and easy with handheld heating tools or bench-mounted heaters.

For heat shrink tubes with adhesive please click here.

Heat-shrink-tubes with adhesive

Heat shrink tubing with adhesiveButton Specifications en

Heat shrink tubing were developed when Raychem's scientists pioneered the application of radiation crosslinking and the development of heat-shrinkable polymer products. Today the heat shrinking tubes of TE Connectivity (Tyco / Raychem) are recognized worldwide for its high quality and wide range of applications. Raytronics AG offers you tubes made of polyolefins, fluoropolymers and elastomers enhanced by radiation crosslinking and heat-shrinkability. When heated during installation, our tubings shrinks to conform to virtually any shape. They provide dependable insulation, mechanical protection, and strain relief, as well as aesthetic appeal.

You can choose from tubings that are highly flexible or semi rigid, designed for operation in high- or low- temperature environments, and halogen-free and flame-retardant to meet a range of industry standards. Available in many sizes, constructions, lengths, and colours to meet both commercial and military specifications, our tubings can also be customized for special applications.

Dual wall heat shrink tubes with an inner wall, either an encapsulate wall or an adhesive wall, melts and flows during installation heating, to protect against environmental damage. Encapsulate protect connections and components from splashes and corrosion, Adhesives go a step further, sealing to plastic, metal, rubber, or other substrates.

Installation is fast and easy with handheld heating tools or bench-mounted heaters.

For heat shrink tubes without adhesive please click here.

Cable identification

Cable identification heat shrink sleevesButton Specifications en

World leaders and innovators of a managed marker system, Raychem and TE Connectivity TMS products lead the way in ensuring operators can easily print, identify, pick, and then place printed markers onto wires or cables with ease. The adhesive strip that covers the markers helps to keep the markers flat and offers optimum material coverage for printing whilst ensuring a smooth transition under the print heat; this avoids unnecessary print head movement. The range of materials cover high performance and commercial applications such as railway, military, low-fire hazard, fluid resistant, high temperature, space, aviation, and electrical or electronic use. Laser beam technology can also be used to mark these products.

Available in two different layout, please choose between printable heat shrink sleeves on ladder format or continuous tubes. For applications with special requirements, please choose for rail EN45545-2, military and aviation MIL / AMS-DTL or UL approved sleeves. Depending on your requirements according to temperature, we divide the shrinkable and printable sleeves into 3 categories; up to +125°C, up to +150°C and up to +225°.

 

Solder devices

Button Specifications enLötmuffen

 

Solder Sleeves and Solder Devices

Solder sleeves and solder devices are designed to offer an easy one-step soluton for wire connections to tabs, posts, pins and mass wire terminations. These wire temination products are housed in a transparent heat shrink insulation sleeve, which provide inspectability and can provide various levels of environmental protection. The fluxed solder preform is essential for a highly controlled soldering process of TE Connectivity (Raychem) solder sleeves. If you are looking for high-quality electrical and mechanical performance, TE's Solder Devices are your fist choice.

How does Solder Sleeves and Solder Devices work?

After heating the premeasured solder and flux inside the heat shrink sleeve melts and creates a repeatable and reliable termination. The heat shrinking tube shrinks and provides a fully insulated, strain-relieved and protected connection. The solder devices help reducing inventory and installation costs, provides a strong and controlled connection and due to the transparent insulation sleeve an easy inspection of the connection.

 

Moulded parts

Moulded partsButton Specifications en

 

Heat-shrinkable moulded parts, boots and transitions

Moulded parts are designed to provide rugged mechanical and environmental protections to wire and cable harnesses. Molded parts are available in different materials and different adhésive coatings. The versions with adhesive coating form a seal and protect cables and equipment from corrosion and mechanical abuse while providing excellent electrical insulating properties. Endcaps provides optimum waterproofing and encironmental protection for underground, underwater and outdoor applications. Endcaps are highly resistant to moisture, fungus and wathering. Heat shrinkable boots and transitions replace tapes, mold-in-place epoxies and grease. Transition moulded parts can be used for cable breakouts, transitions, and terminations. TE Connectivity (Raychem) moulded parts always meet the performance characteristics you require. Please check out our big range of different sizes and types.

Wire and cables

Wire and cablesButton Specifications en

 

SPEC 44 wires and cables with a dual wall construction and a temperature range of -65°C to +150°C are used in broad range of applications. Due to the flexibility and lightweight SPEC 44 wires and cables are used in aircraft, helicopters, ships, trains, defence, commercial and motorsport applications. The PVDF radiation cross-linked insulation provides a good resistance to most chemicals and electrical arc tracking.

SPEC 55 wires and cables with either single wall or dual wall construction and a temperature range of -65°C to +200°C are used in applications wherever reliable performance under extreme conditions is needed. The combination of small size, ultra-lightweight and an ETFE insulation enables SPEC 55 wires and cables for satellites, aircrafts, avionics, helicopters, high performance military and motorsport. The radiation cross-linked ETFE polymer insulations provides an exceptional chemical resistance and a good flexibility in harsh environments.

Adhesives

Adhesives     Button Specifications en

TE Connectivity, Raychem, Tyco

Medical tubings

Medical tubingsButton Specifications en

Raytronics AG is specialized in medical heat shrink tubes. Our heat shrinkable tubes suit excellent to different material requirements and many design situations. Mostly medical heat shrink tubes are compatible for use with ETO and GAMMA sterilization and comes with USP Class VI. For abrasion protection of medical instruments MT1000 and MT3000 are often used. For balloon and stent process aid like laser welding we recommend the polyolefin made MT-LWA and RNF-100 special sizes or the peelable PEEL tubes made of fluoropolymer. MT2000 was developed for laparoscopic-electrosurgical device insulation and MT3000 for protection and insulation of highly flexible joints. For challenging applications we offer FEP (UV-stability), PTFE (chemical resistance) and PEEK (high abrasion resistance) heat shrinking tubes and for very small diameter the Microfit tubes. No matter what application you have, we surely find the suitable heat shrinking tube for you.

 
 
Raytronics AG
Bösch 37
6331 Hünenberg

 

+41 41 768 65 75
+41 41 768 65 80
Raytronics AG
Bösch 37
6331 Hünenberg

 

+41 41 768 65 75
+41 41 768 65 80
 
Linkedin: Raytronics AG