Moulded Parts 342A215
Moulded Parts 342A215
File Size:
178.19 kB
Date:
10 August 2020
Heat shrink boots, 342A215, 45°-Transition
Features
Moulded Parts 342A215 (Y-Transiton, 45°)
These moulded parts or heat shrink boots from TE Connectivity (Raychem / Tyco) are used for mechanical protection and cable strain relief. This version is ideal for cable harness applications where cable branches and breakouts are required. Our moulded parts combine an easy and quick installation with high electric strength, mechanical toughness and chemical and environmental resistance. These moulded parts are with or without coating available.
| As supplied | After heating |
 |
|
Changelog
| Dimensions in mm | Injection and vent port available only on request | ||||||||
| Part Number | Inside diameter (coating reduces Ø max. 1.5mm) | P | R | S | HW | W | |||
| As supplied | After heating | Tolerance +/- 10% | +/- 20% | ||||||
| H | J + K | H | J + K | ||||||
| 342A215 | 18.7 | 10.6 | 7.9 | 5.6 | 82.5 | 63.5 | 39.4 | 2.3 | 2 |
Notes
| Material (not all combinations available) | ||
| Ordering Code | Material | Operating temperature range |
| -3 | Polyolefin, semi-rigid | -55°C to +135°C |
| -4 | Polyolefin, flexible | -55°C to +135°C |
| -12 | Fluoroelastomer, flexible | -55°C to +200°C |
| -25 | Elastomer, fluid resistant | -75°C to +150°C |
| -100 | Polyolefin, halogen free | -30°C to +105°C |
| Coating, Adhesive | ||
| Ordering code | Material | Operating temperature range |
| /42 | Polyamide, hot-melt | -20°C to +60°C |
| /86 | High performance, hot-melt | -55°C to +120°C |
| /225 | Epoxy/Polyamide | -75°C to +150°C |
| Colour | |
| Ordering Code | Colour |
| 0 | Black |
Produkt anfragen / bestellen
Raytronics AG
Bösch 37
6331 Hünenberg
Bösch 37
6331 Hünenberg
Tel
+41 41 768 65 75
Fax
+41 41 768 65 80
Mail
Raytronics AG
Bösch 37
6331 Hünenberg
6331 Hünenberg
Tel
+41 41 768 65 75
Fax
+41 41 768 65 80
Mail
Linkedin: Raytronics AG