These end caps provides water-proofing and environmental protection for underwater, underground and outdoor applications. These moulded parts are resistant to moisture, fungus and weathering. The heat shrink boots 102L011 to 102L066 are used for protecting cables, wires and pipes or capping unused outlets in transitions. When used with adhesive these end caps provides an environmental seal.
Part number | Inside diameter (coating reduces max. 1.5mm) | Total length | Wall thickness | |
As supplied | After shrinking | +/- 20% | ||
102L011-R05/S(S100) | 12 | 4 | 46 | 2.3 |
102L022-R05/S(S100) | 21.5 | 7 | 66 | 3.2 |
102L033-R05/S(S100) | 40 | 15 | 114 | 3 |
102L044-R05/S(S50) | 55 | 25 | 158 | 3.4 |
102L048-R05/S(S25) | 75 | 32 | 195 | 3.4 |
102L055-R05/S(S10) | 100 | 45 | 199 | 3.6 |
102L066-R05/S(S10) | 120 | 60 | 208 | 4 |
Material (not all combinations available) | ||
Ordering Code | Material | Operating temperature range |
-3 | Polyolefin, semi-rigid | -55°C to +135°C |
-4 | Polyolefin, flexible | -55°C to +135°C |
-12 | Fluoroelastomer, flexible | -55°C to +200°C |
-25 | Elastomer, fluid resistant | -75°C to +150°C |
-100 | Polyolefin, halogen free | -30°C to +105°C |
Coating, Adhesive | ||
Ordering code | Material | Operating temperature range |
/42 | Polyamide, hot-melt | -20°C to +60°C |
/86 | High performance, hot-melt | -55°C to +120°C |
/225 | Epoxy/Polyamide | -75°C to +150°C |
Colour | ||
Ordering Code | Colour | |
0 | Black |