These moulded parts or heat shrink boots INSTALITE are used for mechanical protection and cable strain relief. This version is ideal for cable harness applications where cable branches and breakouts are required. Our moulded parts combine an easy and quick installation with high electric strength, mechanical toughness and chemical and environmental resistance. These moulded parts are available with or without coating.
As supplied | After heating |
Dimensions in mm | Injection and vent port available only on request | ||||||||
Part number | Inside diameter (coating reduces max. 1.5mm) | P | R | Avg. weight saving | Wall thickness | ||||
As supplied | After heating | Tolerance +/- 10% | +/- 20% | min. | |||||
H | J | H | J | HW | JW | ||||
202K121-25L-0 | 24 | 24 | 10.4 | 5.6 | 38 | 21 | 20% | 1.6 | 0.41 |
202K132-25L-0 | 30 | 30 | 14.2 | 5.9 | 55 | 32 | 20% | 1.8 | 0.81 |
202K142-25L-0 | 31 | 31 | 18 | 7.1 | 67 | 35 | 20% | 1.8 | 0.81 |
202K153-25L-0 | 36 | 36 | 22.4 | 8.4 | 80 | 42 | 23% | 2 | 0.81 |
202K163-25L-0 | 43 | 43 | 28.2 | 9.9 | 99 | 61 | 28% | 2.2 | 0.81 |
202K174-25L-0 | 60 | 60 | 35.1 | 15.7 | 130 | 72 | 22% | 3.3 | 1.02 |
202K185-25L-0 | 66 | 66 | 44.5 | 16.8 | 170 | 90 | 21% | 3.8 | 1.63 |
Material | ||
Ordering Code | Material | Operating temperature range |
-25L | Light weight polymer, fluid resistant | Please contact us |
Coating, Adhesive | ||
Ordering code | Material | Operating temperature range |
/225 | Epoxy/Polyamide | -75°C to +150°C |
Colour | ||
Ordering Code | Colour | |
0 | Black |