Heat shrink tube with adhesive, MWTM, halogen free, UV-resistant
Heat shrink tube with adhesive, MWTM, halogen free, UV-resistant
File Size:
134.80 kB
Date:
09 March 2016
Temp: -40°C to +90°C, medium wall halogen free tube
Features
Heat shrink tube with adhesive, MWTM, UV-resistant, halogen free
MWTM heat shrink tubes are designed for insulation on low voltage cable accessories, as well as for sealing and protection purposes on low and medium voltage cables. The heat shrinking tubes MWTM are halogen free and silicone free. Further these tubes are UV stabilized. MWTM tubes are inline coated with a hot meld adhesive.
Product facts of heat shrink tube MWTM
- 3 to 1 shrink ratio
- Halogen free
- Silicon free
- UV-resistant
- High mechanical strength
- Unlimited shelf-life
Dielectric strength of heat shrink tube MWTM
- ≥ 10 kV / mm min.
Temperature
- Operating range: -40°C to +90°C
- Minimum shrinking temperature: +70°C
- Minimum full recovery temperature: +90°C
Changelog
| Sizes in mm | |||||
| Part Number | Inside diameter | Wall thickness | Pieces of 1.00 Meter | Colour | |
| As supplied | After heating | After heating +/- 5% | in Meter | ||
| MWTM-10/3-1000/172 | 10 | 3 | 1 | 25 | black |
| MWTM-16/5-1000/172 | 16 | 5 | 1.4 | 25 | black |
| MWTM-25/8-1000/172 | 25 | 8 | 2 | 10 | black |
| MWTM-35/12-1000/172 | 35 | 12 | 2 | 10 | black |
| MWTM-50/16-1000/172 | 50 | 17 | 2 | 10 | black |
| MWTM-63/19-1000/172 | 63 | 19 | 2.4 | 10 | black |
| MWTM-75/22-1000/172 | 75 | 22 | 2.7 | 5 | black |
| MWTM-85/25-1000/172 | 85 | 25 | 2.8 | 5 | black |
| MWTM-95/29-1000/172 | 95 | 29 | 3.1 | 5 | black |
| MWTM-115/34-1000/172 | 115 | 34 | 3.1 | 5 | black |
| MWTM-140/42-1000/172 | 140 | 42 | 3.1 | 5 | black |
| MWTM-160/50-1000/172 | 160 | 50 | 3.2 | 5 | black |
| MWTM-180/60-1000/172 | 180 | 60 | 3.2 | 5 | black |
Notes
Testing of heat shrink tube MWTM
| Physical Characteristic | Test Method | Material Requirements |
| Tensile Strength | ISO 37 | 14 MPa min |
| Ultimate Elongation | ISO 37 | 350% min |
| Hardness | ISO 868 | ≥45 shore D |
| Accelerated ageing | ||
| 7 days at +150°C +/- 2°C | ISO 188 | |
| Tensile Strength | ISO 37 | 14 MPa min |
| Ultimate Elongation | ISO 37 | 350% min |
| Thermal Endurance* | IEC 60216 | 120°C min. |
| Low Temperature Flexibility | ASTM D2671 Procedure C | No cracking at 4 hours at -40°C +/- 3°C |
| Dielectric Strength | IEC 60243 part 1 and 2 | ≥10 kV/mm min. |
| Volume Resistivity | IEC 60093 | 1 x 1010ohm cm min |
| Water Absorption | ISO 62 method 1 | ≤0.25% max after 14 days at 23°C +/- 2°C |
| Weathering | the material from which MWTM is manufactured contains carbon black to protect it from ultra-violet light | |
| Resistance to Liquids | ||
| 7 days in transformer oil VDE | ISO 1817 | |
| 0370 at 23°C +/- 2°C | ||
| Tensile Strength | ISO 37 | 14 MPa min |
| Ultimate Elongation | ISO 37 | 300% min. |
Produkt anfragen / bestellen
Raytronics AG
Bösch 37
6331 Hünenberg
Bösch 37
6331 Hünenberg
Tel
+41 41 768 65 75
Fax
+41 41 768 65 80
Mail
Raytronics AG
Bösch 37
6331 Hünenberg
6331 Hünenberg
Tel
+41 41 768 65 75
Fax
+41 41 768 65 80
Mail
Linkedin: Raytronics AG