Ben-Har 1151 FR Grade A (temperature -70°C to +200°C)
Ben-Har 1151 FR Grade A (temperature -70°C to +200°C)
File Size:
266.75 kB
Date:
15 March 2016
A flame-retardant solution made of silicone rubber coated fiberglass for electrical insulation, high tensile and dielectric strength
Features
Bentley-Harris® Ben-Har 1151-FR sleeving is an extremely flexible silicone rubber coated fiberglass sleeving with outstanding flame retardant properties. It is a UL recognized component, meeting VW-1 flammability requirements, recommended for Class H (200ºC) systems. The special combination of a smooth fiberglass bore and flexible, elastomeric silicone coating allows this sleeving to expand and conform over larger dimensions, assuring a snug fit, permanent placement, and elastic self-fitting on components or terminals. The excellent bond of rubber coating to the braid insures against damage from rough assembly handling.
Ben-Har 1151-FR is resistant to acids, alkalis, organic solvents, and aliphatic hydrocarbons. Slight swelling is produced by aromatic solvents and chlorinated hydrocarbons. Ketones and esters may cause deterioration. Ben-Har 1151-FR is compatible with common Class H insulating varnishes. Ben-Har 1151-FR is commonly used in appliance assemblies, wire harnesses, transformer leads, power supplies, and motor coil and heater leads. This product can be obtained in colours for identification and appearance.
Product facts of Ben-Har 1151 FR Grade A
- Grade A (7 KV)
- VW-1 up to sizes 2”
- CSA File #LR58703
- MIL-I-3190/6 QPL
- NEMA 5
- Applicable documents : ASTM-D-350, ASTM-D-372, UL 1441, NEMA TF-1
- Excellent low temperature flexibility
- Operating temperatrue: -70°C to +200°C
- Tensile strength: 875 psi
- Dielectric strength: 485 volts/mil
Changelog
| Dimensions in mm | |||||
| Part Number | Inside diameter | Inside diameter | Size | Diameter tolerance | Packing unit |
| Inch | mm | AWG | m | ||
| 3200192414S | 0.022 | 0.56 | 24 | +/- 0.15 | 150 |
| 3200192214S | 0.027 | 0.69 | 22 | +/- 0.15 | 150 |
| 3200192014S | 0.034 | 0.86 | 20 | +/- 0.15 | 150 |
| 3200191814S | 0.042 | 1.07 | 18 | +/- 0.20 | 150 |
| 3200191614S | 0.053 | 1.35 | 16 | +/- 0.20 | 150 |
| 3200191414S | 0.066 | 1.68 | 14 | +/- 0.20 | 150 |
| 3200191214S | 0.085 | 2.16 | 12 | +/- 0.20 | 75 |
| 3200191014S | 0.106 | 2.69 | 10 | +/- 0.20 | 75 |
| 3200190914S | 0.118 | 3 | 9 | +/- 0.20 | 75 |
| 3200190814S | 0.133 | 3.38 | 8 | +/- 0.20 | 75 |
| 3200190714S | 0.148 | 3.76 | 7 | +/- 0.30 | 75 |
| 3200190614S | 0.166 | 4.22 | 6 | +/- 0.30 | 38 |
| 3200190514S | 0.186 | 4.72 | 5 | +/- 0.30 | 38 |
| 3200190414S | 0.208 | 5.28 | 4 | +/- 0.40 | 38 |
| 3200190314S | 0.234 | 5.94 | 3 | +/- 0.40 | 38 |
| 3200190214S | 0.263 | 6.68 | 2 | +/- 0.40 | 15 |
| 3200190114S | 0.294 | 7.47 | 1 | +/- 0.40 | 15 |
| 3200190014S | 0.33 | 8.38 | 0 | +/- 0.40 | 15 |
| 3200101014S | 0.375 | 9.52 | 3/8" | +/- 0.60 | 15 |
| 3200101114S | 0.438 | 11.12 | 7/16" | +/- 0.60 | 15 |
| 3200101314S | 0.5 | 12.7 | 1/2" | +/- 0.60 | 15 |
| 3200101614S | 0.625 | 15.87 | 5/8" | +/- 0.90 | 15 |
| 3200101914S | 0.75 | 19.05 | 3/4" | +/- 0.90 | 15 |
| 3200102214S | 0.875 | 22.22 | 7/8" | +/- 0.90 | 15 |
| 3200102514S | 1 | 25.4 | 1" | +/- 0.90 | 15 |
| 3200103214S | 1.25 | 31.75 | 1 1/4" | 15 | |
| 3200103814S | 1.5 | 38.1 | 1 1/2" | 15 | |
| 3200105114S | 2 | 50.8 | 2" | 15 | |
| 3200106414S | 2.5 | 63.5 | 2 1/2" | 15 | |
| 3200107614S | 3 | 76.2 | 3" | 15 | |
Notes
| Ben-Har in white or black available on request |
Produkt anfragen / bestellen
Raytronics AG
Bösch 37
6331 Hünenberg
Bösch 37
6331 Hünenberg
Tel
+41 41 768 65 75
Fax
+41 41 768 65 80
Mail
Raytronics AG
Bösch 37
6331 Hünenberg
6331 Hünenberg
Tel
+41 41 768 65 75
Fax
+41 41 768 65 80
Mail
Linkedin: Raytronics AG